EPS, Styropor and Polystyrol inks

Stamping inks for printing or marking EPS, Styrofoam and polystyrene

Our stamping inks Lenizett ™ and Paradol ™ have been developed especially for printing on polystyrene, Styropor®, EPS. As a stamping ink, this ink has special characteristics that greatly affect the behavior on the marking machine (e.g. roll punch) and the print itself on polystyrene afterwards.

On the roller stamp, our stamping ink easily penetrates into the paint roller (Porelon ™ or foam) and is being held there properly. When rolling up or stamping, the stamping ink is being transferred brilliantly from the paint roller to the different types of printing rolls. On the types of pressure rollers, the stamping ink remains flat and results in a smooth coverage even after the transfer to polystyrene, Styrofoam® or EPS. Since polystyrene, Styropor® or EPS have a challenging surface and conventional stamping inks tend to retract into the capillaries, we have adjusted our Lenitzett ™ and Paradol ™ to avoid this very effect. As a result, the printed image is more defined and the stamping ink remains on the surface, where it covers much better than conventional inks do.

The drying time on the EPS, Styrofoam and polystyrene surface takes about 30 seconds at 21 ° room temperature and a normal order quantity. On Polycarbonate it takes 150 seconds, on metal 90 seconds, on high gloss coated cardboards 45 seconds and on matt painted cardboard about 5 seconds.

Viscosity: <4 mPa*s (ISO-Cup Nr.3: 27s)

To adjust the drying times to your needs, you have got the opportunity to purchase drying accelerators or drying retarders.
Both stamping inks, Lenizett ™ and Paradol ™, can be used for futher non-absorbent substrates as well, despite their optimization for roll punches and polystyrene (Styropor®, EPS).


Art.No.Product description
Colour
WH-LZ105BKLenizett™ stamping ink fast-drying (30s) for EPS, Styrofoam and polystyrene, black, slightly translucent, viscosity : 4 mPa*s, ISO-Cup Nr. 3 = 27 sStempeltinte schwarz schwarz
WH-LZ105BLLenizett™ stamping ink fast-drying (30s) for EPS, Styrofoam and polystyrene, blue, slightly translucent, Viskosität : 4 mPa*s, ISO-Cup Nr. 3 = 27 sstamping ink blue blau
WH-LZ105GNLenizett™ stamping ink fast-drying (30s) for EPS, Styrofoam and polystyrene, green, slightly translucent, viscosity : 4 mPa*s, ISO-Cup Nr. 3 = 27 sstamping ink green grün
WH-LZ105ORLenizett™ stamping ink fast-drying (30s) for EPS, Styrofoam and polystyrene, orange, slightly translucent, viscosity : 4 mPa*s, ISO-Cup Nr. 3 = 27 sstamping ink orange orange
WH-LZ105RTLenizett™ stamping ink fast-drying (30s) for EPS, Styrofoam and polystyrene, red, slightly translucent, viscosity : 4 mPa*s, ISO-Cup Nr. 3 = 27 sstamping ink red rot
WH-LZ105VTLenizett™ stamping ink fast-drying (30s) for EPS, Styrofoam and polystyrene, violet, slightly translucent, viscosity : 4 mPa*s, ISO-Cup Nr. 3 = 27 sstamping ink violet violett
WH-LZ105YLenizett™ stamping ink fast-drying (30s) for EPS, Styrofoam and polystyrene, yellow, slightly translucent, viscosity : 4 mPa*s, ISO-Cup Nr. 3 = 27 sstamping ink yellow gelb
WH-PA805BKParadol™ slower drying stamping ink (55s) for EPS, Styrofoam and polystyrene, black, slightly translucent, viscosity : 4 mPa*s, ISO-Cup Nr. 3 = 27 sstamping ink black schwarz
WH-PA805BLParadol™ slower drying stamping ink (55s) for EPS, Styrofoam and polystyrene, blue, slightly translucent, viscosity : 4 mPa*s, ISO-Cup Nr. 3 = 27 sstamping ink blue blau
WH-PA805GNParadol™ slower drying stamping ink (55s) for EPS, Styrofoam and polystyrene, green, slightly translucent, viscosity : 4 mPa*s, ISO-Cup Nr. 3 = 27 sstamping ink green grün
WH-PA805ORParadol™ slower drying stamping ink (55s) for EPS, Styrofoam and polystyrene, orange, slightly translucent, viscosity : 4 mPa*s, ISO-Cup Nr. 3 = 27 sstamping ink orange orange
WH-PA805RTParadol™ slower drying stamping ink (55s) for EPS, Styrofoam and polystyrene, red, slightly translucent, viscosity : 4 mPa*s, ISO-Cup Nr. 3 = 27 sstamping ink red rot
WH-PA805VTParadol™ slower drying stamping ink (55s) for EPS, Styrofoam and polystyrene, violet, slightly translucent, viscosity : 4 mPa*s, ISO-Cup Nr. 3 = 27 sstamping ink violet violett
WH-PA805YParadol™ slower drying stamping ink (55s) für EPS, for EPS, Styrofoam and polystyrene, yellow, slightly translucent, viscosity : 4 mPa*s, ISO-Cup Nr. 3 = 27 sstamping ink yellow gelb
WH-CLEAN-ETStamp Cleaner & Thinner ET for Lenizett ™ and Paradol ™ stamping inks, great for cleaning stamp rolls, paint rollers and other equipment
WH-TRB01Drying accelerators
WH-TRV02Drying retarder
ROLST65-09TELRoll stamp for continuous printing on all surfaces, is often used for EPS, impression width 65 mm, impression length 260 mm without return of unimpaired paint roller
FROL65x25Ink roller Porelon ™ outer diameter 65mm, inner diameter 25mm, width 65mm, unimpregnated
FROL65-09BKInk roller (Plastik Ink ™) imprint width 65, black, soaked without absorption
FROL65-09BLInk roller (Plastik Ink ™) imprint width 65, blue, soaked without absorption
FROL65-09RTInk roller (Plastik Ink ™) imprint width 65, red, soaked without absorption
FROL65-09GNInk roller (Plastik Ink ™) imprint width 65, green, soaked without absorption
DRROL9065Press rollers, clichés for roller stamp, oil- and acid-proof, roll width 90 mm, image width 65 mm
DRROL7051Press rollers, clichés for roller stamp, oil- and acid-proof, roll width 70 mm, image width 51 mm
DRROL4230Press rollers, clichés for roller stamp, oil- and acid-proof, roll width 42 mm, image width 30 mm
"The colours may differ in the screen display from the original."

K238548Stamping inks for EPS, Styrofoam and polystyrene