Ceracode® hot inks for metal
Ink and red-hot metal – do they go together? Anyone working in the metalworking industry knows that many steel forming and hardening processes require high temperatures, which makes marking extremely difficult. However, whether for quality assurance, the wider push towards digitalisation or supply chain traceability, permanent marking and the associated data are of great benefit and highly valuable. Yet the question of how the steel should ultimately be marked has usually been difficult to answer. Manual marking with paint markers is quick to carry out, but the quality is insufficient and it is no longer feasible when dealing with a high throughput of parts. Depending on subsequent processing steps, the marking can also fade very quickly. The use of a laser, on the other hand, ablates material and thus produces more durable markings. However, the laser’s main weaknesses lie in its low processing speed and high costs.
A long-standing rival to laser marking is inkjet printing – simple to implement and cost-effective. Until now, inks have been given little consideration for high-temperature applications, as conventional inks are based on organic substances which are pyrolysed by the high temperatures and thus disappear almost entirely. However, the use of inorganic pigments alone is not sufficient, as these do not form a strong bond. At the same time, metals are subject to thermal expansion and are often intentionally mechanically deformed, which means that markings are subjected to extreme stresses.
Based on joint research and development work by the Fraunhofer Institute IKTS, Octopus Fluids GmbH & Co. KG and Senodis Technologies GmbH, several Ceracode® hot inks have already been developed that can withstand these specific conditions. The Ceracode® inks, developed and produced in Germany, are capable of withstanding extreme temperatures whilst forming excellent adhesion to the metallic substrate, provided the surfaces do not become scale-covered. Using innovative particles from Fraunhofer IKTS, an enamel-like layer forms locally during hot forming, the properties of which are precisely tailored to the steel. To ensure that high-quality, reliably readable codes can be produced, the particles must first be converted by Octopus Fluids into a printable inkjet ink. Senodis contributed the necessary printing technology and evaluation software.
Printing technique used
Drop-on Demand (DOD)
MPERIA V-Series 8000+ von Matthews Marking Systems
| Resolution: | 16x16 DMC |
| Point size: | 1-2 mm |
| Code size: | 17x17 mm to 80x80 mm (MIDI-Modell) |
| 27x27 mm to 100x100 mm (MAXI-Modell) |
Continuous Inkjet (CIJ)
CodeCube-XL Inkdustry GmbH
| Resolution: | 5 to 48 Scatter plots |
| Code size: | 2x2 mm to 12x12 mm |
DOD-CC-LS / Drop-on Demand (DOD)
DOD-CC-LS is the first Ceracode® ink specifically developed for marking AlSi-coated steel intended for hot-stamping, and it contains inorganic phosphorescent particles. Depending on the duration of the process, the printed codes can be baked at temperatures between 750 and 1100 °C. They can then be read using UV light (365 nm), even if the steel has darkened during press hardening. The solvent-based ink is free from aromatic solvents such as xylene and can be used on standard industrial oil coatings up to a maximum of 2.4 g/m².
CIJ-CC-LS / Continuous Ink Jet (CIJ)
The adaptation of DOD ink for use in a continuous inkjet system is the focus of current developments, with the aim of producing smaller, high-resolution codes. This involves printing significantly finer droplets, which in turn carry far fewer particles. A prerequisite for this application is therefore that the steel is processed under inert or reducing conditions, so that the surface is altered as little as possible. The maximum oil content of the substrate is also lower, at 0.3 g/m².
SP-CC-LS / Screen printing (SP)
The screen printing process offers a cost-effective and rapid solution when a repeating pattern (grid and dot patterns, company logos, etc.) needs to be applied and the substrate is flat. For Ceracode® inks, screen printing represents a promising new application, as the inks’ good adhesion and legibility under UV light can also be utilised to great effect here. One possible application is, for example, the computer-aided measurement of the actual deformation of steel components following hot forming. To this end, the relevant components can be measured using a regular pattern both before and after forming. The ink’s solvent-based formulation also enables fast drying times of around 10 seconds and water-resistant markings even before curing.
DOD-CC-W / Drop-on Demand (DOD)
Based on the DOD-CC-LS, this ink is a TiO₂-based white alternative. The lack of UV fluorescence is offset by improved visibility under normal light. Like the original, this ink can be applied to oily surfaces, can be fired at temperatures between 750 and 1100 °C, and is free from aromatic solvents. Organic dyes may also be added to ensure a clearly visible colour change during firing.
DOD-CC-WS / Drop-on Demand (DOD)
As a further development of the DOD-CC-W, this Ceracode® hot ink boasts a significantly shorter drying time. Such modifications require highly volatile solvents, which usually also have a negative impact on the ink’s flow on the substrate, the settling behaviour of the particles or the drying behaviour at the print head. However, these problems were successfully resolved through a specialised combination of solvents and binders, as well as by optimising the printer’s cleaning cycle.
In batch tests, the quick-drying DOD-CC-WS achieved a drying time (touch-dry) of approximately 2.5 s on non-oiled surfaces – a significant improvement over the DOD-CC-W, which has a drying time of 60–70 s.
DOD-CC-WS-XL / Drop-on Demand (DOD)
At the customer’s request, the DOD-CC-WS was to be adapted so that it could produce particularly large codes on steel cylinders. By adjusting the viscosity and surface tension of the ink, it had to be ensured that the droplets – which were up to 15 times larger – did not spread uncontrollably. In addition, the steel had a very uneven surface, which encouraged the ink to spread. However, an even shorter drying time would have caused the ink to dry on the print head, thereby adversely affecting printability. By carefully varying the binder composition, a good balance was found that combines code size and legibility.
Furthermore, it has been demonstrated that, thanks to the particularly large droplets, the codes can be read through a layer of paint using eddy current measurements. Electromagnetic induction thus enables non-destructive identification without the code being visually recognisable.
DOD-CC-KT / Drop-on Demand (DOD) Kenntrace
A key factor in the use of the first Ceracode® inks is the temperature at which the metal is processed. This must be high enough to allow the particles to develop adhesion from 750 °C onwards, which is why the range of applications is limited. However, in the metalworking industry, temperatures below 700 °C are frequently used, for example in tempering, semi-hot forming or extrusion.
As part of a two-year, publicly funded research and development project, the particles and inks were modified so that durable markings could be produced even at temperatures of 550–600 °C. However, as the organic components were not always completely pyrolysed at these temperatures and dark carbon could remain in the marking, the contrast of lighter pigments was compromised. For this reason, the use of coloured metal oxides was necessary to produce a more intense contrast. The significantly altered chemical composition of the particles, in turn, required a fundamental change to the ink formulation. This concerned the dispersant, the binders, the solvents and the additives, which, in combination, had to ensure the ink’s good printability.
The DOD-CC-KT is particularly well suited for use on aluminium, as aluminium does not develop a tarnish, thus creating a striking contrast against the metallic substrate. Following curing, excellent adhesion was achieved on both steel and aluminium, which, due to its inorganic nature, remains unaffected by solvents.
Ceracode® Hot inks for ceramics
Alongside the metalworking industry, the production of ceramics is another important area of application for hot inks. However, this presents entirely new challenges that must be overcome:
1. Temperature
During the firing of ceramics, temperatures regularly exceed 1300 °C, which constitute particularly extreme conditions. Even inorganic compounds begin to decompose at these temperatures or diffuse into the matrix of the oxide ceramics, which impairs contrast and edge sharpness. If the ceramic is then fired multiple times, or if its final application involves prolonged exposure to high temperatures, these effects are further exacerbated.
2. Raw material properties
The properties of inorganic pigments are fundamentally disadvantageous for the development of inkjet inks. Even TiO₂ still presents major stabilisation challenges today. The high particle density and low viscosity of the ink promote sedimentation and require very small particle sizes << 1 µm. The low colour strength of inorganic pigments compared to organic pigments, on the other hand, necessitates larger particle diameters or high solid content.
One possible alternative is precursor compounds, which are only converted into the colour-giving metal oxides during the firing process. However, these can only be dissolved in the ink medium to a limited extent, and the amount of metal oxide obtained is less than 50 per cent of the starting compound. The extremely fine distribution of the oxides produced across the surface of the ceramic and the large contact area further facilitate the diffusion processes.
3. The available data
Whilst there is sufficient information and raw materials available regarding the stabilisation of TiO₂ to address the topic in detail, the situation is quite different for other metal oxides. In particular, when a solvent-based ink is to be developed – and an aqueous environment is therefore not an option for stabilising inorganic particles – reliable research data is very scarce. Furthermore, the replication
or implementation of experimental stabilisation approaches outside strictly controlled laboratory conditions is not readily achievable.
Despite these hurdles, several inks have already been successfully developed that are specifically tailored to the composition of the ceramic, the firing temperature and the end application. Through continuous development and optimisation, the search continues for new opportunities for improvement and fields of application in order to expand the portfolio.
DOD-FE-S / Drop-on Demand (DOD)
Based on an organometallic precursor compound, this solvent-based ink has been developed for firing particularly lightweight and porous silicate ceramics at temperatures of 1300 °C. Depending on the properties of the ceramic prior to firing, even higher firing temperatures are possible. During firing, a visible colour change from green to brown occurs. The use of DOD-FE-S enables the automated marking of a large number of ceramic components and the precise correlation of process conditions with component properties.
DOD-FE-UV / Drop-on Demand (DOD)
Certain applications require markings that are not visible to the end user, but which are nevertheless intended to enable the traceability of a component during manufacture or to provide clear proof of its origin. Typically, invisible markings that are only visible under UV or IR light are used in such cases. The special properties of DOD-FE-UV enable precisely this by specifically utilising the diffusion of metal oxides into the aluminium oxide matrix to create a negative contrast under UV light.
CIJ-MN-PC / Continuous InkJet (CIJ)
When it comes to producing particularly small codes on ceramics, one of the best options is continuous inkjet (CIJ). However, the fine droplets produced by CIJ pose particular challenges for ink development in view of the solid-state chemistry of ceramics. The diffusion processes specifically exploited in DOD-FE-UV are entirely undesirable for visible markings, as they reduce edge sharpness and cause the codes to ‘blur’. However, they cannot be avoided entirely, and the higher the temperature or the longer the firing process, the more pronounced the effect. Provided that a maximum temperature of approximately 950 °C is maintained, the CIJ-MN-PC is suitable for producing codes on flat aluminium oxide ceramics which change colour from red to black during firing. The smallest codes tested with this ink have an edge length of 4x4 mm and can be seen at the bottom edge of the two images below. The precursor compound used for this ink has the advantage that it is completely soluble in the ink medium, meaning there is no risk of pigment sedimentation.
DOD-MN-NP und CIJ-MN-NP / Drop-on Demand (DOD)
In order to achieve the highest possible contrast even at temperatures above 950 °C, and particularly above 1300 °C, the aim of current developments is to replace the precursor used in CIJ-MN-PC with suitable nanoparticle-based pigments. To achieve this, however, the ink must be fundamentally modified, starting with the solvent. All components, such as binders or additives, must be optimised for compatibility with one another and with the particles. The most complicated step, however, is stabilising the heavy particles in the low-viscosity solvents, which requires the search for a suitable dispersant as well as appropriate processing methods.
The image shown compares CIJ-MN-PC (top) with an experimental formulation of DOD-MN-NP (bottom) following firing at 1550 °C for 1 hour on aluminium oxide. The code length is approximately 6 cm. The contrast and edge sharpness of the new ink are already significantly better. Further improvements are still needed in terms of resolution by adapting the ink from the robust but coarse DOD process so that it can be printed using CIJ.